Paid a Contractor by Credit Card? Do You Still Need a 1099?

Card payments a contractor accepts go on Form 1099-K, not 1099-NEC. If a pay-by-card service sent ACH or a check, you likely still file a 1099-NEC.
CEO of Zil Money
Published Nov 20, 2026
AICPA SOC 1AICPA SOC 2PCI DSS CertifiedISO 27001 CertifiedISO 9001 CertifiedISO 20000 CertifiedNIST SP 800-53A Revision 5HIPAA CompliantCCPAGDPR

Last updated: November 19, 2026. General information, not tax or legal advice.

Quick answer: It depends on how the contractor was paid. If the contractor accepted your card through their own card processor, leave it off your 1099-NEC; the processor reports it on Form 1099-K. If a pay-by-card service such as ZIL MONEY charged your card and the contractor got ACH, a check or a wire, you most likely need a 1099-NEC for 2026 totals of $2,000 or more.

Your bookkeeper is pulling contractor totals for January, and some of those payments went on the business credit card. Here is how to sort each payment, what to put on the form, and what to collect now so year-end is quick.

Do You Need to Send a 1099 if You Paid a Contractor With a Credit Card?

You do not need a 1099-NEC for a payment the contractor accepted as a card payment. You most likely do need one when your card funded the payment but the contractor received ACH, a check or a wire. Under the IRS definitions, the deciding question is how the contractor was paid, not how you paid.

The IRS states the card rule in its Instructions for Forms 1099-MISC and 1099-NEC: “Payments made with a credit card or payment card and certain other types of payments, including third-party network transactions, must be reported on Form 1099-K by the payment settlement entity under section 6050W and are not subject to reporting on Form 1099-MISC or Form 1099-NEC.”

Use this table to sort each contractor payment:

How the contractor got paid Who usually reports it Form
The contractor ran your card on their own card reader, invoice link or merchant account The contractor’s card processor 1099-K (leave it off your 1099-NEC)
A pay-by-card service charged your card and sent the contractor ACH, a check or a wire Most likely you, the payer 1099-NEC if the year’s total is $2,000 or more (confirm with your tax professional)
A pay-by-card service sent the contractor a virtual card, which the contractor charged through their own card processor Usually the contractor’s card processor Generally 1099-K (confirm with your tax professional)
You paid by ACH, check or wire from your business account You, the payer 1099-NEC if the year’s total is $2,000 or more
The contractor is a C or S corporation (including an LLC taxed as one) Generally no one, with exceptions such as legal services Usually none

Why Don’t Card Payments Go on a 1099-NEC?

Card payments stay off the 1099-NEC because the company that settles the card payment to the contractor reports it on Form 1099-K instead.

The Treasury regulation for business payments, 26 CFR 1.6041-1(a)(1)(iv), says payments “subject to reporting under both sections 6041 and 6050W are reported under section 6050W and not section 6041.” Section 6050W is the Form 1099-K rule.

The Instructions for Form 1099-K say a card payment is reported for the “participating payee,” defined as a person “who accepts a payment card, or any account number or other indicia associated with a payment card, as payment.” So the card exception follows the person who accepted the card.

What if a Pay-by-Card Service Sent the Contractor an ACH or Check?

When a pay-by-card service charges your card and pays the contractor by ACH, check or wire, the contractor did not accept a card. The card exception most likely does not cover that payment, so plan to include it on the contractor’s 1099-NEC and confirm with your tax professional.

With a pay-by-card service, the service is the business that accepts your card. The contractor gets an ordinary ACH, check or wire payment. Under the IRS 1099-K definition of a participating payee (someone who accepts a payment card), the contractor is most likely not the payee on any 1099-K for that charge. The 1099-K instructions also say that “in-house accounts payable departments, and automated clearing houses do not qualify as TPSOs,” so an ACH deposit by itself does not move the payment to a 1099-K.

The IRS instructions do not include an example that names pay-by-card services, so this is a reading of the definitions, not a quoted IRS ruling. One exception: if the payment service is set up to collect card payments on the contractor’s behalf, the contractor may get a 1099-K from that service instead, so ask the service how it reports. Reporting these payments is the cautious choice, because the contractor received the money as an ordinary ACH, check or wire payment and must report it as income either way.

The virtual card exception: some services, including ZIL MONEY, can pay the contractor by virtual card. If the contractor charges that virtual card through their own card processor, the contractor accepted a card, so that payment generally goes on the processor’s 1099-K, not your 1099-NEC. Ask your tax professional how to treat those payments, and do not count them twice.

What Is the 1099-NEC Threshold for 2026?

For payments made in 2026, you file a 1099-NEC when you pay a contractor $2,000 or more for services in the course of your business. The threshold rose for tax years beginning after 2025, so older guides that say $600 are out of date for 2026 payments.

The IRS instructions say: “For tax years beginning after 2025, the minimum threshold amount for reporting certain payments required to be reported on certain information returns and/or perform backup withholding on those payments increased to $2,000 and may be adjusted for inflation beginning in calendar year 2027.” The Box 1a instructions now read “Enter nonemployee compensation (NEC) of $2,000 or more.”

  • Only business payments count. The instructions say to file “only when payments are made in the course of your trade or business. Personal payments are not reportable.”
  • Card-accepted payments are left out of the total. A payment the contractor accepted by card goes on the 1099-K, so do not add it to the 1099-NEC amount.
  • The payout date sets the year. A payment counts in the year the contractor was paid, not the year you pay your card bill. A December 2026 payout belongs on the 2026 form.
  • Some payments have other rules. Gross proceeds paid to an attorney are reported at $600 or more in Box 10 of Form 1099-MISC, per the same instructions.

Example: A Monthly Contractor Paid by Card Through a Payment Service

This is a hypothetical example. A 14-person landscaping company pays an independent bookkeeper $650 a month. The bookkeeper only takes direct deposit, so the owner pays each invoice by business credit card through ZIL MONEY, and the bookkeeper receives ACH. The owner finished personal and business verification, so each $650 payment fits under the $5,000 per-transaction limit.

Item Amount for 2026
Paid to the bookkeeper (12 x $650) $7,800
Card fee at 2.9% (ZIL MONEY’s published rate, assuming it is charged to you on top of each payment) $226.20
Amount for Box 1a of the 1099-NEC $7,800

The $7,800 is over the $2,000 threshold, and the bookkeeper received ACH, not a card payment. So the owner plans a 1099-NEC for $7,800. The $226.20 card fee was not paid to the bookkeeper, so it does not belong in Box 1a. Record the fee as its own expense line.

The common mistake: leaving these payments off the 1099-NEC because “we paid by card.” Your statement shows a card charge, but the bookkeeper received $7,800 of ACH deposits. If a required 1099-NEC is not filed and furnished, the business can face IRS information return penalties.

How Do You Pay a 1099 Contractor by Credit Card if They Only Take Direct Deposit?

You use a pay-by-card service: your credit card pays for the payment, and the contractor receives direct deposit. With ZIL MONEY, you choose Credit Card as where the money comes from and ACH / Direct Deposit as how the contractor gets paid. A 2.9% credit card fee applies.

The ZIL MONEY pay by credit card page says, “Your vendor does not need to accept cards. You choose how the vendor receives the money, such as ACH. Your card is what pays for the payment.” The steps shown on that page:

  1. Choose who you are paying, and enter the amount.
  2. Pick Credit Card as where the money comes from.
  3. Pick how the contractor gets paid. The page shows ACH / Direct Deposit, Same Day ACH, Wire and Virtual Card, or you can let the vendor decide.
  4. Add a memo with the invoice number, then confirm. Track the payment in Payments Out.

The ZIL MONEY help center (checked November 2026) says you “can pay up to $500 per transaction by credit card. After you finish personal and business verification, the limit goes up to $5,000 per transaction.”

For 1099 season, pick ACH / Direct Deposit yourself rather than letting the vendor decide, so you know each payment’s payout method. A memo such as “Invoice 2026-07, bookkeeping, July” also tells your bookkeeper it was a service payment.

Pay Contractors by Card, Even if They Only Take Direct Deposit

Pick Credit Card as where the money comes from, then choose ACH / Direct Deposit for the contractor. A 2.9% credit card fee applies.

What Records Make 1099 Season Easy When You Pay Contractors by Card?

Collect a Form W-9 before the first payment, and note how the contractor received every payment. With those two records, sorting 1099-NEC payments from 1099-K payments is simple at year-end.

  • Form W-9 first. The W-9 gives you the contractor’s taxpayer identification number (TIN) and tax classification. The Instructions for Form W-9 say that when backup withholding applies, “A payor must deduct, withhold, and deposit with IRS 24% of reportable payments.”
  • Payout method on every payment. Mark each one “card accepted by contractor” or “ACH, check or wire to contractor.” ACH, check and wire payments count toward your 1099-NEC total.
  • Entity type. Payments to a corporation, including an LLC treated as a C or S corporation, generally do not need a 1099-NEC. Payments for legal services are an exception.
  • The due date. The IRS instructions say to furnish Form 1099-NEC to the contractor and file it with the IRS by January 31, moving to the next business day when that date falls on a weekend or legal holiday. January 31, 2027 is a Sunday, so 2026 forms are due Monday, February 1, 2027.
  • Your state. Many states have their own 1099 filing rules, so check your state’s requirements too.

The IRS About Form 1099-NEC page links the current form and instructions.

When Is Paying a Contractor by Credit Card the Wrong Choice?

Paying a contractor by card through a payment service is the wrong choice when the 2.9% fee costs more than the extra time it buys you, or when you cannot pay the card statement in full. Paying through a pay-by-card service most likely does not change the 1099-NEC filing.

  • Your cash is not short. If the money is already in your account, an ACH from your account avoids the 2.9% card fee.
  • You would carry the balance. Card interest can cost more than the extra time before your card statement is due.
  • The payment is over your limit. ZIL MONEY’s per-transaction card limit is $500, or $5,000 after verification. Larger payments may need extra steps or another payment method.
  • You hoped to skip the 1099-NEC. Choose the payment method for cash flow, not to avoid a form.

For the rest of the card math, see whether the card fee beats the reward when you pay bills by card and how paying vendors by credit card protects cash flow. Credit card processing fees apply. Credit card rewards are determined by your card issuer and are subject to your card’s terms and conditions.

Your next three steps: collect a W-9 from every contractor, record each payment’s payout method, and file and furnish your 1099-NECs by February 1, 2027 for 2026 payments.

Contractor 1099 Questions, Answered

If I pay a vendor with a credit card, do I need to issue a 1099?

The same rule applies to vendors. A card payment the vendor accepted goes on the processor’s Form 1099-K. If a pay-by-card service sent the vendor ACH or a check for services, a 1099-NEC is most likely due when the 2026 total is $2,000 or more. Payments for merchandise generally are not reported on a 1099-NEC.

Do I send a 1099-NEC to a contractor that is an LLC?

It depends on how the LLC is taxed. The IRS says payments to an LLC treated as a C or S corporation generally do not need a 1099-NEC, except for legal services. An LLC not taxed as a corporation, such as a single-member LLC that is disregarded for tax, is generally reportable. The contractor’s Form W-9 shows which applies.

What if a contractor will not give me a Form W-9?

Ask again in writing and keep a record of the request. If the contractor does not provide a correct taxpayer identification number, you generally must start backup withholding, and the IRS Form W-9 instructions set the rate at 24% of reportable payments. Your tax professional can explain how to deposit and report the withheld amount.

Does paying by card change whether someone is a contractor or an employee?

No. Worker status depends on the working relationship, such as who controls how the work is done, not on how you pay. The IRS explains the tests on its page about independent contractors and employees. Paying an employee by card through a payment service does not make them a contractor, and their pay still belongs on Form W-2.

Can a contractor get a 1099-K and a 1099-NEC for the same year?

Yes, if they were paid two ways. Payments the contractor accepted through their own card processor can appear on a 1099-K. Payments they received by ACH, check or wire generally count toward your 1099-NEC total, which is $2,000 or more for 2026. Each payment should appear on only one form.

This article is general information as of the date above, not legal, tax or financial advice. Tax rules can change and depend on your facts, so confirm with your tax professional before you file.

Zil Money is a financial technology company, not a bank. Banking and money movement services are provided through partner financial institutions and licensed service providers. FDIC insurance coverage applies only to eligible deposit products and accounts, and is subject to applicable terms, conditions, limitations, and requirements. Additional information regarding partner institutions, products, and services is available in the applicable terms and agreements.

☰ ON THIS PAGE
5 min read

Share or save for later - this guide is updated as content evolves.

Ready to get paid faster?

Send a payment request by email or text. Your customer pays by ACH or card.

Get startedBook a demo →

Zil Money® is a financial technology company, not a bank. Banking services provided by Citizens Bank, N.A., Member FDIC.